Follow these easy steps to get your AEG FAVORIT 54710 Dishwasher up and running in no time.
Ensure that the electrical and water connections comply with the installation instructions. Any necessary plumbing work should be carried out by a qualified plumber or competent person. Position the machine close to a water tap and drain if possible.
Remove all packaging materials from inside and outside the appliance. Keep packaging materials away from children as they can pose a danger.
Set the water softener to remove minerals and salts from the water supply. Follow the manual instructions to adjust the water hardness range.
Pour 1 litre of water into the salt container, then fill it with dishwasher salt to ensure optimal performance.
Fill the rinse aid dispenser to help in drying the dishes without streaks or spots. Adjust the rinse aid level if necessary based on drying results.
Ensure that the filters are clean and properly positioned. This is crucial for the efficient operation of the dishwasher.
Slide the baskets back into the machine and ensure the spray arms can rotate freely. Load dishes and cutlery as recommended in the manual for best results.
Add the required amount of detergent into the dispenser according to the dosage instructions in the washing programmes chart. Close the detergent dispenser lid.
Press the On/Off push button. The On/Off indicator light will come on. Select the desired washing programme and close the door to start the cycle. The programme will start after about 6 seconds.